ASTM D4355-07 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus ASTM D4355-07土木织物耐侯老化性能测试标准测试方法 Scope: 1.1 This test method covers the determination of the deterioration in tensile strength of geotextiles by exposure to xenon arc radiation, moisture, and heat. 1.2 The light […]
EN 12224 土工织物及相关产品-耐气候老化性测定
EN 12224-2000 Geotextiles and geotextile-related products – Determination of the resistance to weathering; German version EN 12224:2000土工织物及相关产品.耐气候老化性能测定 样品要求:仅评判外观: 标准样条150×70mm, 5 pcs 需评价其他物理性能: 根据相关性能测试要求制样(EN 12226) 周期:22个工作日
EN 12226 土木织物及其相关产品耐久性试验
EN 12226-2000Geotextiles and geotextile-related products – General tests for evaluation following durability testing EN 12226-2000土木织物及其相关产品耐久性试验的一般评估试验 样品要求: 参见具体项目样品要求 此标准主要评价项目:一是外观, 二是拉伸强度和伸长率 (编织织物用EN ISO 13934-1,非编织织物用EN 29073-3) 周期:参见具体测试项目测试周期
EN 12447 土工织物-测定耐水解作用筛分试验
EN 12447-2001 geotextiles and geotextile-related products – screening test method for determining the resistance to hydrolysis in water supersedes env 12447:1997 EN 12447-2001土工织物及其有关产品.测定耐水解作用的筛分试验方法 样品要求:测试后相关评价测试所要求的尺寸 评价方法参见EN 12226 周期:30个工作日
GB/T 17632 土工布抗酸、碱液性能的试验
GB/T 17632-1998 Geotextiles and geotextile-related products–Test method for determining the resistance to liquids of acids and bases GB/T 17632-1998 土工布及其有关产品 抗酸、碱液性能的试验方法 样品要求: 单位面积质量试样:最小100×100mm, 15 pcs 尺寸变化和拉伸测试试样: 300×50mm(机织物宽度为60mm), 25 pcs/方向 (一般分纵向和横向两个方向) 土工格栅在宽度上应为完整单元,长度方向上至少有3个连接点,试样中间有一个连接点 周期:9~11个工作日
EN 14030 土工布耐酸和碱液体性测定筛选试验
EN 14030-2001Geotextiles and geotextile-related products – Screening test method for determining the resistance to acid and alkaline liquids (ISO/TR 12960:1998, modified) EN 14030-2001土工布和土工布相关产品 耐酸和碱液体性测定的筛选试验方法 样品要求: 单位面积质量试样:最小100×100mm, 15 pcs 尺寸变化和拉伸测试试样: 300×50mm(机织物宽度为60mm), 25 pcs/方向 (一般分纵向和横向两个方向) 土工格栅在宽度上应为完整单元,长度方向上至少有3个连接点,试样中间有一个连接点 (评价方法引用EN12226) 周期:9~11个工作日
ISO/TR 12960 土木布耐化学试剂性能测试
ISO/TR 12960-1998 Geotextiles and geotextile-related products — Screening test method for determining the resistance to liquids ISO/TR 12960-1998土木布耐化学试剂性能测试方法 样品要求: 单位面积质量试样:最小100×100mm, 15 pcs 尺寸变化和拉伸测试试样:300×50mm(机织物宽度为60mm), 25 pcs/方向 (一般分纵向和横向两个方向) 土工格栅在宽度上应为完整单元,长度方向上至少有3个连接点,试样中间有一个连接点 (评价方法引用EN12226) 周期:9~11个工作日
ASTM D6389 评价土工织物抗化学液试验
ASTM D6389-99(2005) Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids ASTM D6389-99(2005) 评价土工织物抗化学液的试验方法 样品要求:视具体测试项目而定 周期:7~9个工作日
ISO 12236 土工合成材料–静态击穿试验
ISO 12236-2006 Geosynthetics — Static puncture test (CBR test) ISO 12236-2006 土工合成材料–静态击穿试验(CBR试验) 样品要求:直径250mm样品,最少 5 pcs. 建议送大幅样品裁样 周期:视具体测试时间而定
ASTM D6241 测定土工织物和相关材料静定穿刺强度的试验
ASTM D6241-04(2009) Method BStandard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe ASTM D6241-04(2009) 利用50mm测头测定土工织物和其他相关材料静定穿刺强度的试验方法 Scope: 1.1 This test method is an index test used to measure the force required to puncture a geotextile and geotextile related products. The relatively large […]